 | Single-Frame front bumper EVO - "RS4-Look" Ref: HF 8051
The front bumper "EVO" replaces the original front bumper of your A4 B7 8E and gives your car the sportive look of the new Audi RS4 B7 8E. It can be combined with the S4, RS4 silver and RS4 black front grill. This and the use of other OEM components like the "RS4" mesh for the fog lights guarantees an OEM look which is still individual. OEM components like the Parktronic-sensors, the headlight washer system and the fog lights can be taken from the original bumper. The alloy crash bar can be taken as well, this guarantees complete security in case of a crash.The bumper is available for cars with or without headlight washers and with or without Parktronic. If you car has no headlight washers, the openings in the bumper have to be sealed with the OEM washer caps (see below). The RS4 mesh for the fog lights is additionally needed.Additionally available is the light package which consists of a LED day driving light with 5 LEDs. The LEDs have to be inserted into the "RS4" mesh which has to be cut to make the lights fit.For cars with S-Line exterior package or from the S4, the serial sprayer jets cannot be inserted into the new bumper. Therefore you have to buy the sprayer jets from the normal A4 B7 either from Audi (OEM part no. 8E0 955 101 G (left) + 8E0 955 102 G (right)) or buy them directly from us (HF 8056 below)Attention: on cars with 6 cylinder Diesel engine the holders of the intercoolers have to be modified, otherwise it is not possible to insert the fog lights into the bumper! Therefore calculate approx. 30 to 60 minutes of additional working time!
Price: £601.20/€697.39 (Including VAT at 20% - USA, Canadian, and non-EU countries do not pay the VAT (Sales Tax) - which is deducted in checkout.)
|
|
 |
 | Single-Frame front bumper EVO - "RS4-Look" - Parktronic Ref: HF 8051-P
The front bumper "EVO" replaces the original front bumper of your A4 B7 8E and gives your car the sportive look of the new Audi RS4 B7 8E. It can be combined with the S4, RS4 silver and RS4 black front grill. This and the use of other OEM components like the "RS4" mesh for the fog lights guarantees an OEM look which is still individual. OEM components like the Parktronic-sensors, the headlight washer system and the fog lights can be taken from the original bumper. The alloy crash bar can be taken as well, this guarantees complete security in case of a crash.The bumper is available for cars with or without headlight washers and with or without Parktronic. If you car has no headlight washers, the openings in the bumper have to be sealed with the OEM washer caps (see below). The RS4 mesh for the fog lights is additionally needed.Additionally available is the light package which consists of a LED day driving light with 5 LEDs. The LEDs have to be inserted into the "RS4" mesh which has to be cut to make the lights fit.For cars with S-Line exterior package or from the S4, the serial sprayer jets cannot be inserted into the new bumper. Therefore you have to buy the sprayer jets from the normal A4 B7 either from Audi (OEM part no. 8E0 955 101 G (left) + 8E0 955 102 G (right)) or buy them directly from us (HF 8056 below)Attention: on cars with 6 cylinder Diesel engine the holders of the intercoolers have to be modified, otherwise it is not possible to insert the fog lights into the bumper! Therefore calculate approx. 30 to 60 minutes of additional working time!
Price: £601.20/€697.39 (Including VAT at 20% - USA, Canadian, and non-EU countries do not pay the VAT (Sales Tax) - which is deducted in checkout.)
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Rear Apron - RS4-look Ref: HF8053
The rear apron replaces the original rear apron of your A4 B7 8E and gives your car the sportive look of the Audi RS4. The rear apron is permanently glued to the upper part of your rear bumper. The rear apron can be combined with the "EVO" tailpipes or the Duplex sports mufflers
Price: £189.60/€219.94 (Including VAT at 20% - USA, Canadian, and non-EU countries do not pay the VAT (Sales Tax) - which is deducted in checkout.)
|
|
|
|
|
 | RSA Tailpipe Kit Ref: HF7467A
RSA-tailpipes-kit. For cars with 1 OEM Tailpipe - the right tailpipe is only a dummy - pipes are crooked on the outside, complementary to the lines of the A4. Oval tailpipes left and right. Stainless steel. Connection diameter 60 mm. Outside diameter 157 x 92 mm. Fixation by welding to the original muffler on the left and right side.
Price: £217.20/€251.95 (Including VAT at 20% - USA, Canadian, and non-EU countries do not pay the VAT (Sales Tax) - which is deducted in checkout.)
|
|
|
| RSA Tailpipe Kit Ref: HF7468A
Evo/RSA-tailpipes-kit. For cars with 1 double OEM Tailpipe the right tailpipe is only a dummy - pipes are crooked on the outside, complementary to the lines of the A4. Oval tailpipes left and right. Stainless steel. Connection diameter 60 mm. Outside diameter 157 x 92 mm. Fixation by welding to the original muffler on the left and right side.
Price: £218.40/€253.34 (Including VAT at 20% - USA, Canadian, and non-EU countries do not pay the VAT (Sales Tax) - which is deducted in checkout.)
|
|
|
 | "Power Dome" Bonnet Addition Ref: HF7959-A4A
Fixation by glue, glue included
Price: £181.20/€210.19 (Including VAT at 20% - USA, Canadian, and non-EU countries do not pay the VAT (Sales Tax) - which is deducted in checkout.)
|
|
|
|
|
|
|
|
|
|
|
 | "RS4" Front Grille including Number Plate Holder - silver Ref: HF7052-RS4X
Cars without Parktronic - original audi part!!**you will be able to obtain this part more cheaply from your local Audi dealer - email us for Audi part numbers**
Price: £582.00/€675.12 (Including VAT at 20% - USA, Canadian, and non-EU countries do not pay the VAT (Sales Tax) - which is deducted in checkout.)
|
|
|
|
|
|
|
|
|
|
|
